|
Materials Carried |
Lump Size |
Temperatrure of Materials Carried |
Belt Surface Temperature |
|
Coke |
100~200mm(4~8 inch) |
70~100 degree |
50~60 degree |
|
Cement |
Powder |
100~250 degree |
80~90 degree |
|
Clinker |
10~30 mm (0.4~1.2 inch) |
100~220 degree |
100~110 degree |
|
Molding |
-- |
200~250 degree |
80~90 degree |
|
Metal Pow der |
-- |
170 degree |
120~130 degree |
|
Raw Material |
below 30mm(1.2 inch) |
180~220 degree |
100~120 degree |
|
Return of Sintered Ore |
below 10mm(0.4 inch) |
260 degree |
180~200 degree
|
Name: HR120 Heat Resistant Conveyor Belt, Flat Conveyor Belt, Heavy Duty Conveyor Belt, Fire Resistant Conveyor Belt
Feature:
Our heat resistant conveyor belt adopt SBR or EPDM as covering layer, special high temperature resistant canvas as carcass materials, not only solving the fabric shrinkage and deformation problems under the environment of high temperature, but also avoiding crucial problem as high degree of saturation of ethylene propylene rubber, poor adhesion. Ls is lighter, of long lifespan(about2-4times )and good performance of heat resistance.
1. Specification is similar to common conveyor belt.
2. GB/T2002-2005 and GB/T7984-2001 Standard are applicable with the international Standard draft ISO/FDIS14890-1999 as reference.
3. Heat resistant conveyor belt is divided into three types as follows:
HR120: Cover consists mainly of SBR. The belt surface temperature of HR120 belt should be than 120º C, the maximum material temperature for short period can reach 170º C. This grade of Heat resistant conveyor belt is mostly common used traditional heat resistant conveyor belt widely used in Cement, coking, metallurgy, chemical, iron and steel industry, etc.
HR150: Cover consists mainly of SBR. The belt surface temperature of HR150 belt should be lower than 150º C, and the maximum material temperature for short period can reach 200º C. Comparing to common conveyor belt, the product is higher temperature resistant, cracking resistant, ageing resistant and long lifespan. It apply to transport high temperature material as sintered ore, clinker, coke, dry lime, dry clay, etc.
HR180: Cover consists mainly of EPDM. The belt surface temperature of HR150 belt should be not higher than 180º C, and the maximum material temperature for short period can reach 250º C, comparing to common conveyor belt, this kind of belt is more cauterant resistant. It forms a dense carbonized layers on belt cover under high temperature to play an effect of heat insulation and cauterant resistance, which can also extend the belt life. It apply to transport high temperature material as special transport situation as sintering ore and cement field, etc .
F.A.Q
1) Is the sample available?
Yes, the sample are available for you to test the quality. If we have samples in warehous.
2) The delivery date?
Normally, the delivery date is 20~30 days.
3) Any quality control?
We have SGS Certificaiton, ISO9000 Certification, and QC system to test and control the quality.
4) Warranty
There's a six-month warranty for our products.
5) Standard: DIN, RMA, AS, SANS, ISO, JIS etc.